Key Features: - HD analog/digital inputs with transcoding and scaling - SD analog/digital inputs with transcoding and scaling - SD and HD per-pixel motion adaptive deinterlacing - User adjustable image enhancement - Transcode Component and RGB analog HD sources - Component and DVI inputs auto-switch between SD and HD source modes. - DVI input accepts 480/576i, 1080i, 480p to 720p input formats - Source aspect ratio selectable as 4:3, letter-box, 16:9 and 1.85 - Programmable output aspect ratio from 1.33 to 2.35 - Zoom in any source up to 33% - RS232 interface for field upgradeability and control - NTSC, PAL and SECAM auto-detection - 3D comb filter for Svideo and Composite inputs - Programmable output resolution from 480p to 720p, plus 1080i - 10 bit DAC for analog outputs - Four configuration memories per input - All setup parameters are unique for each memory. - Can correct for red or green push in a display - Input-cropping, black, contrast, color and hue setup - Adjustable non-linear stretch display mode - Y/C-delay calibration. - 2/5/11 point parametric grayscale calibration - Gamma calibration - CUE and ICP filtering - Extensive suite of built-in test patterns - Programmable input and output color-space - 2:2, 3:2, 3:3 pull-down for film sources - Universal power supply - Optional rack mount ears
Input configurability: - Inputs 1-4 can be DVI, HDMI 444 or 422 component, RGBHV - Input 5 can be Component (HD/SD), Scart (uses in7 for CVS) RGBS, RGsB - Input 6 can be Component (HD/SD), Scart, RGBS, RGsB - Input 7 always Composite - Input 8,9 can be SVideo or Composite - Input 10 can be SDI or Composite (uses CVS on in6 for Composite)
Features above the VisionDVI: - Output resolution up to 1080p for analog and digital outputs - Sharpness control on all input sources (only on S-Video and composite for VisionDVI) - 1080i deinterlacing at up to 1080p output - Larger video processing chip for improved video processing quality over the VisionDVI - 10 bit DAC with oversampling for analog outputs - 3D comb filter for Svideo and Composite inputs - 2 more DVI inputs, 1 SDI input and analog BNC outputs standard
Features above the VisionHDP: - 3D comb filter for Svideo and Composite inputs - 2 more DVI inputs, 1 SDI input standard and analog BNC outputs standard - Professional grade case with machined black-anodized front-panel
Un scalers tres complet (SDI, reglages timing videos, gamma, des-entrelacement HD 1080i) et relativement abordable a moins de 2000€.
Des temoignages de ceux qui l'ont vu tourner et compare a ses concurrents ?
C'est exactement ce qu'il faut pour la HD... ca prends du 1080i pour en faire du 1080p24 a 48Hz, et ca prendra le 1080p24sf que nos TT ne savent pas gerer...
Un seul truc qui me derange pour le moment, apparemment pas de 1080p48 en passthrough, et on est pas sur a 100% qu'il prendra le 1080p24sf du Blu-Ray (ils ont promis un nouveau firmware pour le faire, reste a savoir quand).
BangoO a écrit :Un seul truc qui me derange pour le moment, apparemment pas de 1080p48 en passthrough, et on est pas sur a 100% qu'il prendra le 1080p24sf du Blu-Ray (ils ont promis un nouveau firmware pour le faire, reste a savoir quand).
Apparemment, ils ont l'air de faire ce qu'ils annoncent
Oue !
Et de toute facon ils auront pas trop le choix s'ils veulent en vendre, ils ont tout interet a supporter le Blu-Ray.
Ce qui me fait un peu plus chier, c'est le passthrough pour le PCHC... mais a ce moment un HQP suffit (500$ de moins), et je peux utiliser un hub DVI (150$ de plus)...