Modérateur : Les Modérateurs
Merci à Jérôme, ainsi qu'à Marc Heijligersjerome69 a écrit :Only a few designers are aware that electrical resonances in crossover circuit should be dampened. The acoustic slope remains roughly the same in all cases above, hence a first-ordered electrical filter is NOT equal to a first-order acoustic slope!
I don't know the exact reason why the first-ordered circuit is the only one that is non-sibilant. My suspicion is a combination of less electrical resonance, more transport of charge (current flow), and the fact that a unit is not exactly a Thiel-Small parameter equivalent when used dynamically.
Marc
Thanks again for this fine analysis on electrical filter circuit. Hope this helps to design very high end loudspeakers.
crazyhub a écrit :Merci à Jérôme, ainsi qu'à Marc Heijligersjerome69 a écrit :Only a few designers are aware that electrical resonances in crossover circuit should be dampened. The acoustic slope remains roughly the same in all cases above, hence a first-ordered electrical filter is NOT equal to a first-order acoustic slope!
I don't know the exact reason why the first-ordered circuit is the only one that is non-sibilant. My suspicion is a combination of less electrical resonance, more transport of charge (current flow), and the fact that a unit is not exactly a Thiel-Small parameter equivalent when used dynamically.
Marc
Thanks again for this fine analysis on electrical filter circuit. Hope this helps to design very high end loudspeakers.
La "sibilance" càd "sifflement" que je "traduis" à l'écoute par des "SSSS" ou des "SSSCH" trop prononcés en attaque de notes ou de voix (c'est bien ça?) ne devrait-elle pas se voir sur une courbe d'intensité fréquentielle (niveau spl plus élevé sur une ou plusieurs fréquences et/ou niveau relatif différent entre bandes de fréquences différentes) ET/OU sur une courbe de distortions?
Les résonances de circuits électriques expliqueraient-elles, au moins pour partie, les différences de comportement (et donc de sonorité) entre différents amplis ?
des "SSSS" ou des "SSSCH" trop prononcés
Revenir vers « Menuiserie & Mécanique »
Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 24 invités