» D²20-6 à 2.800 $ pièce donc
![Laughing :lol:](./images/smilies/icon_lol.gif)
et le suivant
» D²30-6 qui monte à 60.000 et non 100.000 Hz comme le D²20-6
![Shocked :o](./images/smilies/icon_eek.gif)
![Shocked :o](./images/smilies/icon_eek.gif)
![Shocked :o](./images/smilies/icon_eek.gif)
Modérateur : Les Modérateurs
MaXx a écrit :http://home.hetnet.nl/~geenius/Soup.html
un projet similaire
mais bon le W de THIEL est a 400 €.... donc, on met un ETON
home.hetnet.nl a écrit :Crossover components:
L1 = 0,68 mH Intertechnik Tritec inductor 3,5 mm wire, R = 0,11 W (tolerance max 2%)
L2 = 0,56 mH Intertechnik Tritec inductor 3,5 mm wire, R = 0,12 W (tolerance max 2%)
L3 = 3,3 mH air-core inductor 3,0 mm wire, R = 0,19 W (tolerance max 2%)
C1 = 10mF Mundorf M-Cap Supreme Silver/Oil capacitor (tolerance max 2%)
C2 = 0,01mF Vishay MKP1837 polypropylene foil capacitor (tolerance max 1%)
C3 = 4,7mF Mundorf M-Cap Supreme polypropylene foil capacitor (tolerance max 2%)
C4 = 0,01mF Vishay MKP1837 polypropylene foil capacitor (tolerance max 1%)
C5 = 3,3mF Mundorf M-Cap Supreme polypropylene foil capacitor (tolerance max 2%)
C6 = 0,68mF MKP polypropylene foil capacitor (tolerance max 5%)
C7 = 5,6mF MKP polypropylene foil capacitor (tolerance max 5%)
R1 = 15 W, 10 watts metal film resistor (tolerance 2%)
R2 = 1,8 W, 10 watts carbon film resistor (tolerance 2%)
R3 = 10 W, 10 watts carbon film resistor (tolerance 2%)
R4 = 10 W, 10 watts metal film resistor (tolerance 2%)
le cable interne qu'il utilise est un Van Den Hul "Breeze Hybrid" à 29€/m
Revenir vers « Menuiserie & Mécanique »
Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 24 invités